Wilwood Anchor Pin - Holddown Steel - Each - 300-6242

Individual spacers for Wilwood’s Internal Drum Parking Brake brackets. Used to set kit brackets to specific axle offsets. Spacer are made from high strength aluminum alloy. Spacers widths will vary in application based on caliper. Please see...

Wilwood Slide Bolt/Sleeve - DH4P - 300-5968

Slide Pin Bolt Sleeve for many Wilwood Floating calipers. Fits D52 / D154 /DH /HM and HC calipers. Made from high strength steel alloy and plated for corrosion resistance

Wilwood - Caliper Bridge Bolt Spacers - 300-5929

Bridge Bolt Tubes for various Wilwood calipers with a .260” ID, .500” OD and various lengths for specific caliper styles and rotor width. Made from high strength aluminum alloy and anodized for corrosion resistance or a bright polished finish.

Wilwood Pad Wear Plate -FSL/SL 4/6-L/H - 300-5923

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet and Forged Superlite Calipers using .80” thick pads.

Wilwood Pad Wear Plate -FSL/SL 4/6-R/H - 300-5922

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet and Forged Superlite Calipers using .80” thick pads.

Wilwood Pad Wear Plate - NDL - 300-5876

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet and Forged Narrow Dynalite 4 Piston and Dynapro...

Wilwood Pad Wear Plate - DL/DLS - 300-5875

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for Billet and Forged Dynalite 4 Piston and Dynalite / Dynapro...

Wilwood Sintered Steel T-Nut Rotor Dynamic Rear - 300-5806

Rotor T-nuts are used with Dynamic Mount Hats or Rotor Adapters. These sintered steel t-nuts are available in different thickness and bolt hole sizes.

Wilwood Sintered Steel T-Nut Rotor Dynamic Front - SS - 300-5804

Rotor T-nuts are used with Dynamic Mount Hats or Rotor Adapters. These sintered steel t-nuts are available in different thickness and bolt hole sizes.

Wilwood Sintered Steel T-Nut Rotor 0.216in Width 0.251in Thread - 300-5507

Rotor T-nuts are used with Dynamic Mount Hats or Rotor Adapters. These sintered steel t-nuts are available in different thickness and bolt hole sizes.

Wilwood Caliper Bridge Spacer .44 Thick - 300-4919

Caliper Bridge Spacer for Forged Dynalite / Billet Dynalite and NDL Calipers. Available in various thicknesses for .50” thru 1.25” rotor widths. Made from high strength aluminum alloy.

Wilwood Caliper Bridge Spacer .190 Thick - 300-4914

Caliper Bridge Spacer for Forged Dynalite / Billet Dynalite and NDL Calipers. Available in various thicknesses for .50” thru 1.25” rotor widths. Made from high strength aluminum alloy.