Camburg 3/4in. x 1/2in. Hi-misalignment Spacers (pair) - CAM-040035

Our high mis-alignment spacers are CNC machined in-house from heat-treated stainless steel and are available in an assortment of sizes for different heims and uniballs. Our design maximizes strength...

Camburg 4.00 Rear Axle Housing Brake Caliper Tabs (12in. Rotor x 3.5in. Spacing) (pair) - CAM-020102

These are the brake caliper tabs we use when building a Camburg rear end. These are designed for Wilwood's 3.5" lug spacing. They also work with radial mount calipers with the proper machined...

Camburg 4.00 Rear Axle Housing Brake Caliper Tabs (13in. Rotor x 3.5in. Spacing) (pair) - CAM-020103

These are the brake caliper tabs we use when building a Camburg rear end. These are designed for Wilwood's 3.5" lug spacing. They also work with radial mount calipers with the proper machined...

Camburg 4.00 Rear Axle Housing Brake Caliper Tabs (14in. Rotor x 3.5in. Spacing) (pair) - CAM-020104

These are the brake caliper tabs we use when building a Camburg rear end. These are designed for Wilwood's 3.5" lug spacing. They also work with radial mount calipers with the proper machined...

Camburg 4.00 Rear Axle Housing Faceplate Hardware Kit - CAM-020106

This is the upgraded hardware kit included with our 4.00 axle housing for the 3rd member. We use stronger and higher quality custom ARP studs that thread into our machined faceplate that are...

Camburg 4130 SQ. Bolt-on Spindle Snout Block - CAM-010018

Looking to build your own spindles/uprights using a bolt-on hub spindle snout? Our spindle snout block is CNC machined in-house from aircraft quality 4130 chromoly that's 1/2" thick. It's 5" x 5" and...

Camburg 4130 TT Bolt-on Spindle Snout Block - CAM-010061

Looking to build your own spindles/uprights using a bolt-on spindle snout? Our TT spindle snout block is CNC machined in-house from aircraft quality 4130 chromoly that’s 5/8? thick. It’s 5? x 7.25?...

Camburg 5/8-18 x 4.5in. G9 Hex T/A Bolt Kit - CAM-020113

Looking to replace the uniball pivot bolts on your Camburg rear trailing arms? This kit comes with four 5/8” grade 9 hex bolts and the necessary grade 8 washers and stover lock nuts.This Part...

Camburg 5/8-18 x 4.5in. G9 Hex UCA Bolt Kit - CAM-010086

Looking to replace the uniball bolts on your Camburg upper control arms? This kit comes with two 5/8” grade 9 hex bolts and the necessary grade 8 washers and stover lock nuts.This Part...

Camburg 5/8-18 x 4.5in. Hex UCA Bolt Kit - CAM-010139

Looking to replace the uniball bolts on your Camburg upper control arms? This kit comes with two 5/8” grade 9 hex bolts and the necessary grade 8 washers and stover lock nuts.This Part...

Camburg 5/8in. 4130 Weld Washers (4pk) - CAM-040015

Elevate your off-road fabrication projects with the Camburg 0.625" 4130 Weld Washers (4pk). These washers are the perfect companion for your suspension system upgrades and custom builds, providing...

Camburg 5/8in. ID D44 TTB Uniball Spacers (pair) - CAM-010173

Looking to replace the uniball spacers in your Ford F-150/Bronco 4wd TTB uniball pivot conversion? These spacers are machined from heat-treated stainless steel and are designed to fit into a 1”...