S&S Cycle 24in x 19-1/2in x 25-1/4in Engine Assembly Box - 50-9578

S&S Cycle 24in x 19-1/2in x 25-1/4in Engine Assembly Box

S&S Cycle 29-84 BT Replacement Tappet Roller Set - 330-0377

Rebuild your tappets with the S&S replacement Tappet rollers. They fit 1929-1956 Side Valve Big Twin motors, 1936-1984 OHV Big Twins and 1957-1985 Ironhead Sportster® models.This Part...

S&S Cycle 2in Baffle Assembly - 551-1583

Baffle Assembly, dB Insert, 2"

S&S Cycle 2in ID 90 Degree Silicone Coupler - 500-1475

S&S Cycle 2in ID 90 Degree Silicone Coupler

S&S Cycle 2in ID x 2.125in OD Viton O-Ring - 10 Pack - 50-8094

S&S Cycle 2in ID x 2.125in OD Viton O-Ring - 10 Pack

S&S Cycle 2in ID x 2.187in OD Nitrile O-Ring (-136) - 50-8013

S&S Cycle 2in ID x 2.187in OD Nitrile O-Ring (-136)

S&S Cycle 2in ID x 3in Length Silicone Coupler - 170-0682

S&S Cycle 2in ID x 3in Length Silicone Coupler

S&S Cycle 2in Power Tune XTO Muffler Insert - 550-1665

The Muffler Inserts from S&S® are designed to fine-tune the Power Tune XTO Exhausts, allowing you to customize and increase/decrease the performance and decibel levels.

S&S Cycle 3-5/8in Bore P-Series Engine Gasket Kit - 106-0408

SH/P-Series, 3-5/8" Bore, (Logo Side Faces Cylinder)

S&S Cycle 3-7/16in x Up To 4-3/4in Stroke Piston Set - .010in - 920-0075

These 3-7/16" .010" bore, low compression stroker pistons are part of an S&S stock bore stroker kit for 1936-'84 HD® big twins, and are designed to be used in conjunction with S&S® stroker flywheels...

S&S Cycle 3-7/8in -3.937in Cylinder Head Gasket - 910-0465

Head/O-ring/Exhaust, Stock Bolt Pattern, Including Twincooled®, .045", 3.937".

S&S Cycle 3-Piece Weight Set - 53-0021

3-Piece Weight Set includes: (2) 500g, (1) 1000g.