Camburg 3.25 Rear Rotor Adapter (6x6.512x9.19) - CAM-020144

Looking for a replacement or spare brake rotor adapter for our Camburg 3.25 rear hubs? These are machined from billet aluminum and include the 3/8” drilled head allen bolts and AN washers. These are...

Camburg 3.50 Rear Axle Housing Brake Caliper Tabs (12in. Rotor x 3.5in. Spacing) (pair) - CAM-020099

These are the brake caliper tabs we use when building a Camburg rear end. These are designed for Wilwood's 3.5" lug spacing. They also work with radial mount calipers with the proper machined...

Camburg 3.50 Rear Axle Housing Brake Caliper Tabs (13in. Rotor x 3.5in. Spacing) (pair) - CAM-020100

These are the brake caliper tabs we use when building a Camburg rear end. These are designed for Wilwood's 3.5" lug spacing. They also work with radial mount calipers with the proper machined...

Camburg 3.50 Rear Axle Housing Brake Caliper Tabs (14in. Rotor x 3.5in. Spacing) (pair) - CAM-020101

These are the brake caliper tabs we use when building a Camburg rear end. These are designed for Wilwood's 3.5" lug spacing. They also work with radial mount calipers with the proper machined...

Camburg 3.50 Rear Axle Housing Faceplate Hardware Kit - CAM-020105

This is the hardware kit included with our 3.50 axle housing for the 3rd member. These thread in from the backside then the nut tightens down on the case. We don't use gaskets between the housing and...

Camburg 3.50/4.00 Axle Housing Drain Kit - CAM-020097

This is the drain plug kit we use in our Camburg 3.50 and 4.00" axle housings but can be used for many different things. You can either MIG or TIG weld the steel bung on and then thread in the zinc...

Camburg 3/4-16 x 4.5in. G8 Hex LCA Bolt Kit - CAM-010135

Looking to replace the outer uniball bolts on your Camburg lower control arms? This kit comes with two 3/4” grade 8 hex bolts and the necessary grade 8 washers and stover lock nuts.This Part...

Camburg 3/4-16 x 5.5in. G8 Hex LCA Bolt Kit - CAM-010141

Looking to replace the outer uniball bolts on your Camburg lower control arms? This kit comes with two 3/4” grade 8 hex bolts and the necessary grade 8 washers and stover lock nuts.This Part...

Camburg 3/4in. 4130 Weld Washers (4pk) - CAM-040014

Enhance your off-road fabrication projects with the Camburg 0.75" 4130 Weld Washers (4pk). These washers are a must-have for any suspension system upgrade or custom fabrication endeavor, offering...

Camburg 3/4in. LHT Round 4130 Thread Bung (stepped) [1.25 x .120] - CAM-040023

Our Camburg threaded bungs are machined in-house from aircraft quality 4130 chromoly, not cheap mild steel or imported low quality material. These are a stepped design to match the OD of the tubing...

Camburg 3/4in. LHT Round 4130 Thread Bung (stepped) [1.50 x .120] - CAM-040139

Our Camburg threaded bungs are machined in-house from aircraft quality 4130 chromoly, not cheap mild steel or imported low quality material. These are a stepped design to match the OD of the tubing...

Camburg 3/4in. RHT Round 4130 Thread Bung (stepped) [1.25 x .120] - CAM-040022

Our Camburg threaded bungs are machined in-house from aircraft quality 4130 chromoly, not cheap mild steel or imported low quality material. These are a stepped design to match the OD of the tubing...