COMP Cams Spring Locator 1.285in x .532in x .135in (Set of 16) - 4684-16

Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4684 seat's 1.285" OD works well with our alve springs in ." guide...

COMP Cams Spring Locator 1.300in OD, .805in ID, .205in THICKNESS - 4683-1

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4683 seat's 1.300" OD works well with our valve springs in ." guide...

COMP Cams Spring Lock Tool GM Cam Phaser Limiter - 5455

Cam phasers are specially designed, computer-controlled Cam Gears that automatically optimize Camshaft timing based on the current engine rpm. Currently they are used in all 2005 and newer Ford...

COMP Cams Spring Micrometer 1.400-1.800 - 4928CPG

Quickest, easiest, most accurate way to measure valve spring installed height Install just like a spring, then is expanded until it fully seats valve, locks and retainer. Simulated Installation...

COMP Cams Spring Micrometer 1.600-2.200 - 4929CPG

Quickest, easiest, most accurate way to measure valve spring installed height Install just like a spring, then is expanded until it fully seats valve, locks and retainer. Simulated Installation...

COMP Cams Spring Seat - 03-08 Dodge Hemi 5.7/6.1L - 4801-16

Made from a hardened steel alloy, these spring seats ensure your valve springs stay in place during high RPM operation, and that they do not damage the head. Made specifically for use with Dodge 5...

COMP Cams Spring Seat .045 X .520 X .87 - 4680-1

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4680 seat's 1.300" OD works well with our 7228 and 7230 conical springs...

COMP Cams Spring Seat .060 X .530 X .91 - 4676-1

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4676 seat's 1.300" OD works well with our 7228 and 7230 conical springs...

COMP Cams Spring Seat .060 X .570 X .91 - 4677-1

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4677 seat's 1.300" OD works well with our 7228 and 7230 conical springs...

COMP Cams Spring Seat .100 X .770 X 1.3 - 4686-1

ID Spring Locator - 1.300" OD, .770 I.D, .100" Thickness - Single

COMP Cams Spring Seat .570in Non LS - 4682-1

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4682 seat's 1.300" OD works well with our 26925, 26926 and 26526 valve...

COMP Cams Spring Seat 1.285 X .532in X .040in (Set of 16) - 4685-16

Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4685 seat's 1.285" OD works well with our alve springs in ." guide...