Edelbrock Torker II 360 Manifold - 5076

Designed for high performance street 340-360 c.i.d. Chrysler V8s. Manifold not equipped with EGR. Can be used on 318 c.i.d. if 340-360 c.i.d. cylinder heads are used. Not for heavy vehicles. Will not...

Edelbrock Torker II 440 Manifold - 5091

Edelbrock part #9618 Pushrods are designed for Chrysler 426-572 Gen II Hemi V-8 engines. These one-piece pushrods are manufactured from high quality 4130 Chromoly steel tubing that has been surface...

Edelbrock Torker II 460 Manifold - 5066

2500-6500 RPM high-performance street engines. Single-plane low-rise intake good for high RPM. Ideal for applications with limited hood clearance. For top-end HP and adequate throttle response...

Edelbrock Torker II Manifold - 5001

Edelbrock part #8597 Rocker Stud Bolt Kit is recommended for use with the 61969, 61979, and 61989 cylinder heads. The kit contains eight bolts that are shorter than stock for use on the intake...

Edelbrock Torker II Manifold Pontiac - 5056

Designed for 1965-79 street 389-455 c.i.d. Pontiac V8s. Can be used with Ram Air IV heads; will not fit Ram Air V heads. Will not fit 265/301 c.i.d. V8s or under Trans Am Shaker hood. Victor EFI also...

Edelbrock Torker Plus Cam and Lifters Kit Chev 283-400 - 5002

Edelbrock part #5002 Torker-Plus Camshaft is designed for small-block Chevy 283-350 V-8 applications. The camshaft works well with Torker II manifolds for performance from 2500 to 6500 rpm, this...

Edelbrock Torker Plus Cam and Lifters Kit Ford 289-302 - 5022

Edelbrock part #5022 Torker-Plus Camshaft is designed for small-block Ford 289-302 V-8 applications. The camshaft works well with Torker II manifolds for performance from 2500 to 6500 rpm, this...

Edelbrock Total Power Package Top End Kit for Chevrolet 396-454 Big-Block - 2095

The Edelbrock Total Power Package concept of selling dyno-matched components has been popular since the 1980s, but with the introduction of the Performer RPM Power Package Top End Kits, Edelbrock...

Edelbrock Total Power Package Top End Kit for Chrysler 440 Big-Block - 2087

The Edelbrock Total Power Package concept of selling dyno-matched components has been popular since the 1980s, but with the introduction of the Performer RPM Power Package Top End Kits, Edelbrock...

Edelbrock Transfer Tube O-Rings for Holley 4150 4160 4165 and 4175 Series Carburetors Quantity-2 - 12416

This is a straight male 7/8"-20 with inverted 5/8"-18 female flare and a 3/8" tube size. Fits the following carburetors; Holley 2300, 4150, 4150HP, 4160 (center hung floats only), 4500, 4500HP and...

Edelbrock Transmission Controller GM 4L6XE/4L8XE Carbureted Applications - 36213

Edelbrock Transmission Controller GM 4L6XE/4L8XE Carbureted Applications

Edelbrock Transmission Kick Down Holley Service Parts - 12414

Throttle lever studs are designed to hook cables up to your carburetor. They come in a variety of styles for throttle cables, cruise control cables, and transmission kickdown cables.