COMP Cams Rocker Arm Nuts 3/8in - 1400N-16

COMP Cams Rocker Arm Nuts are a good upgrade for stock components. These are replacement nuts for COMP Cams Magnum Roller Tip Rocker Arms.

COMP Cams Rocker Arm Nut 3/8in - 1400N-1

COMP Cams Rocker Arm Nuts are a good upgrade for stock components. These are replacement nuts for COMP Cams Magnum Roller Tip Rocker Arms.

COMP Cams Rocker Arm BalLS 3/8in - 1400B-16

COMP Cams Pivot Balls are a good upgrade for stock components. These are replacement pivot balls for COMP Cams Magnum Roller Tip Rocker Arms.

COMP Cams Rocker Arm Ball 3/8in - 1400B-1

COMP Cams Pivot Balls are a good upgrade for stock components. These are replacement pivot balls for COMP Cams Magnum Roller Tip Rocker Arms.

COMP Cams Trunion Kit1/2inUpm Type Rockr - 13706-KIT

Upgrade your Ultra Pro Magnum and Ultra Pro Magnum XD rockers to 1/2" studs with this kit. Complete with trunnions, bearings, snap rings, polylocks and studs, this kit can upgrade any of our Ultra Pro Magnum/XD rockers.

COMP Cams Trunion Kit1/2inUpm Type Rockr - 13706-1

Upgrades 1 Rocker. See 13706-KIT for a kit that upgrades all 16 rocker arms.

Comp Cams GM LS7 & Gen V LT Trunnion Upgrade Kit w/ Install Tools - 13704TL-KIT

Our trunnion upgrade kit w/ disassembly tool converts a GM LS7/GEN V LT rocker into a captured trunnion for highe stability and stiffness. Compatible with stock geometry, the upgrade can be performed in 30 minutes with a C-clamp or vise.This Part...

Comp Cams GM LS7 & Gen V LT Trunnion Upgrade Kit - 13704-KIT

Our trunnion upgrade kit converts an OE GM LS7 and GEN V LT rocker into a captured trunnion for higher stability and stiffness. Compatible with stock geometry, our trunnion kit can be performed in 30 minutes with a C-clamp or a bench vise.This Part...

COMP Cams GM LS OEM Rocker Arm Upgrade Kit & Installation Tool - 13702TL-KIT

Our trunnion upgrade kit converts a stock LS series rocker arm into a captured trunnion for increased stability and stiffness. Compatible with stock geometry, our trunnion kit can be performed in 30 minutes with included 54702-TL tool.

COMP Cams Rocker Arm Bearing LS-Type Re - 137022

This bearing is required to upgrade the trunnions in GM LS rocker arms. Requires 32 for complete set of rockers. Set of 32 comes with every 13702-KIT and 13702TL-KIT.

COMP Cams Rocker Arm Trunion LS-Type Re - 137021

Upgraded Trunnion for GM LS1, LS3 and LS7 Rocker Arms

COMP Cams Trunion Kit LS-Type Rocker Retrofit - 13702-KIT

COMP Cams GM LS Series Retro-Fit Trunion Kit converts a stock LS series rocker arm into a roller trunion rocker arm. This increases the stability and stiffness of the rocker arm. It allows the stock type rocker arms to be used in race applications...