COMP Cams Engine Valve Shim Kits - 0.15 x 1.25 - Set of 8 - 4813-8

COMP Cams Engine Valve Shim Kits - 0.15 x 1.25 - Set of 8

COMP Cams Spring Shim Kit 1.500 - 4757CPG

This shim kit contains .015", .030" and .060" thick Valve Spring Shims with 1.500" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs. Made from the highest quality shim stock, these shims are heat...

COMP Cams Spring Shim Kit 1.640 - 4756CPG

This shim kit contains .015", .030" and .060" thick Valve Spring Shims with 1.640" outside diameter and .635"-.650" inside diameter are used to equalize the installed height of valve springs. Made from the highest quality shim stock, these shims are heat...

COMP Cams Spring Shim Kit 1.480 - 4755CPG

This shim kit contains .015", .030" and .060" thick Valve Spring Shims with 1.480" outside diameter and .765" inside diameter are used to equalize the installed height of valve springs. Made from the highest quality shim stock, these shims are heat...

COMP Cams Spring Shim Kit 1.437 - 4754CPG

This shim kit contains .015", .030" and .060" thick Valve Spring Shims with 1.437" outside diameter and .645" inside diameter are used to equalize the installed height of valve springs. Made from the highest quality shim stock, these shims are heat...

COMP Cams Spring Shim Kit 1.250 - 4753CPG

This shim kit contains .015", .030" and .060" thick Valve Spring Shims with 1.250" outside diameter and .814" inside diameter are used to equalize the installed height of valve springs. Made from the highest quality shim stock, these shims are heat...

COMP Cams Spring Locator 1.285in x .532in x .135in (Set of 16) - 4684-16

Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4684 seat's 1.285" OD works well with our alve springs in ." guide applications.

COMP Cams Spring Locator 1.300in OD, .805in ID, .205in THICKNESS - 4683-1

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4683 seat's 1.300" OD works well with our valve springs in ." guide applications.

COMP Cams ID Spring Locator 1.285in OD .805in ID, .135in Thickness - 4678-1

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4678 seat's 1.285" OD works well with our 26918 beehive springs.

COMP Cams 1.540in OD / .570in ID / .060in Thickness ID Spring Locator - Set of 16 - 4642-16

Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4642 features a 1.540" OD and a .570" ID that works well with our 26947 dual valve springs.

Comp Cams Dual Valve Spring With Damper - 1.442 OD - 1.800 IH - .600 LIFT - 391 LBS/IN - FT/HR - Set - 26987-16

COMP Cams' new 26987 dual valve springs are a product of innovative design and superior craftsmanship. Engineered with state-of-the-art techniques and premium wire, they redefine reliability and consistency in the performance automotive aftermarket. The...

Comp Cams Dual Valve Spring w/ Damper - 1.442 OD - 1.800 IH - .600 LIFT - 391 LBS/IN - Set of 12 - 26987-12

Comp Cams Dual Valve Spring w/ Damper - 1.442 OD - 1.800 IH - .600 LIFT - 391 LBS/IN - Set of 12