Camburg 07-21 Toyota Tundra 2wd/4wd 1.5 Shackles - CAM-320002

You can easily lift the rear of your Tundra with our 1.5 lift shackles. Not only are they longer than stock to give you the lift you're looking without stiffening the ride, but are built considerably stronger too. The stock shackles are just stamped out...

Camburg 17-20 Ford Raptor / 15-24 F-150 MIG Shackles (1.5in. extended) - CAM-120024

Our Camburg MIG shackles replace the stock light-duty version on your F-150. The stock shackles are stamped out of thin metal and use a rubber bushing which both allow for a flexy component that also binds as it cycles since the rubber bushings are...

Camburg 17-20 Ford Raptor / 15-24 F-150 Shackle Bushing/Sleeve Kit (3.5in. OAL Sleeve) - CAM-120023

Looking to freshen up the bushings and rebuild your Camburg rear shackles? This kit replaces all the bushings, pivot sleeves and we include our bushing grease packets as well.This Part Fits:YearMakeModelSubmodel2015-2022FordF-150King...

Camburg 17-20 Ford Raptor / 15-24 F-150 MIG Shackles (stock length) - CAM-120021

Our Camburg MIG shackles replace the stock light-duty version on your F-150. The stock shackles are stamped out of thin metal and use a rubber bushing which both allow for a flexy component that also binds as it cycles since the rubber bushings are...

Camburg 10-14 Ford Raptor /04-14 F-150 MIG Shackles (stock length) - CAM-120017

Our Camburg MIG shackles replace the stock light-duty version on your F-150. The stock shackles are stamped out of thin metal and use a rubber bushing which both allow for a flexy component that also binds as it cycles since the rubber bushings are...

Camburg 83-12 Ford Ranger / 82-03 F-150 2wd / 99-18 Silverado 1500 MIG Shackles (1.5in. extended) - CAM-120003

Our extended shackle is designed around using Deaver leaf springs but can also be used with stock springs. We’ve updated the design to a fully boxed/sealed version so they don’t have the dimple dies. These are longer length  than the stock shackles and...

Camburg 1.25in. RHT Round 4130 Thread Bung (stepped) [2.00 x .120] - CAM-040083

Our Camburg threaded bungs are machined in-house from aircraft quality 4130 chromoly, not cheap mild steel or imported low quality material. These are a stepped design to match the OD of the tubing being used with a chamfered fillet for MIG or TIG...

Camburg 1in. RHT Round 4130 Thread Bung (stepped) [1.75 x .120] - CAM-040069

Our Camburg threaded bungs are machined in-house from aircraft quality 4130 chromoly, not cheap mild steel or imported low quality material. These are a stepped design to match the OD of the tubing being used with a chamfered fillet for MIG or TIG...

Camburg 3/4in. LHT Round 4130 Thread Bung (stepped) [1.25 x .120] - CAM-040023

Our Camburg threaded bungs are machined in-house from aircraft quality 4130 chromoly, not cheap mild steel or imported low quality material. These are a stepped design to match the OD of the tubing being used with a chamfered fillet for MIG or TIG...

Stainless Bros 1/4 in. EGT Weld Bung 7/16-20 - 604-01300-40

Stainless Bros 1/4 in. EGT Weld Bung 7/16-20

Stainless Bros M18x1.5mm to M12x1.25mm O2 Sensor Adapter - 604-00900-0000

Stainless Bros M18x1.5mm to M12x1.25mm O2 Sensor Adapter

Stainless Bros O2 Sensor Bung Motorcycle SS304 M12x1.25 50.8mm Tubing - 604-00700-5000

Stainless Bros O2 Sensor Bung Motorcycle SS304 M12x1.25 50.8mm Tubing