Radium Engineering 1.5in Dry Break Fuel Filler, Male, PRV - 20-0996

Radium Engineering 1.5in Dry Break Fuel Filler, Male, PRV

Radium Engineering GM LT4 LT5 PCV Valve Bypass - 20-0988

The OEM PCV valve is installed directly into the valley of these engines. Unfortunately, it takes internal crankcase gasses and deposits them directly into the lower housing of the supercharger. Because the architecture is integrated into the engine,...

Radium Engineering DSV 12AN ORB To 12AN Male High Fill - 20-0935

Fuel cell vent valve will roll-over protection. 12AN Male hose connection.

Radium 10AN Male Press-Fit for Honda K-Series - 20-0909

Press-in valve cover breather fitting. Features a 10AN male 360 degree swiveling fitting. Compatible with all K-series valve covers that have the press-in (not cast) nipple.

Radium Engineering FHST Extension Add-on Audi R8 Type-4S Lamborghini Huracan - 20-0868

Adds volume to the Fuel Hanger Surge Tank kit 20-0860. Includes offset housing and necessary hardware.

Radium Engineering V2 Quick Connect 15mm Male to 10AN Male Straight - 20-0858

Anodized aluminum. For use with OEM hose connection. Converts to 10AN male.

Radium RB25DET 10AN Male Press-In Valve Cover Fitting - Intake & Exhaust Side - 20-0813

This fitting presses into the Nissan RB25DET valve cover and will work on either intake or exhause side. Presents a swiveling 10AN male fitting for connecting a hose to.

Radium Engineering Nissan S14/S15 SR20DET 10AN Male Press-Fit Valve Cover Fitting - Exhaust Side - 20-0812

Press-in valve cover fitting for the Nissan S14/S15 SR20DET. Exhaust side. 10AN male connection.

Radium Engineering Nissan S13 SR20DET 10AN Male Press-Fit Valve Cover Fitting - Exhaust Side - 20-0811

Press in valve cover fittings for the Nissan S13 SR20DET (red and black top). Exhaust side. Double sided 10AN male connections.

Radium KA24DE Valve Cover Intake 10AN Male Press-Fit Fitting - 20-0810

Press-in fitting breather fitting for the Nissan KA24DE valve cover. 10AN male swivels 360 degrees. Stainless steel and aluminum construction.

Radium Engineering S14/S15 RB25DET/SR20DET 10AN Press-In Valve Cover Banjo Fitting Intake Port - 20-0808

This stainless steel and aluminum fitting presses into the S14/S15 Nissan SR20DET valve cover on the intake side and replaces the PCV valve with a high flowing vent-to-atmosphere swiveling 10AN male fitting.

Radium Engineering V2 Quick Connect 19mm Male to 10AN Male Straight - 20-0758

Adapter fitting clips on to the valve cover vent fitting on the BMW B58 engine and converts to a 10AN male.