COMP Cams 1.680 Spring Seat Cutter For - 4741

Cuts cylinder head spring seats to 1.680" outer diameter / .560" inner diameter. Requires the use of an arbor/pilot, which are available for 5/16", 11/32" and 3/8" valve stem sizes.

COMP Cams 11/32 Arbor (For Cutters) - 4732

This Arbor/Pilot is required for use with COMP Spring Seat Cutters and Valve Guide Cutters. They will work with the valve guide cutters used for shortening the guide for a high lift Cam or installing a COMP Cams PTFE Seal for oil control.

COMP Cams Cutter For Stud Boss - 4729

When using screw-in Studs on a factory cylinder head it is necessary to machine down the Stud boss equal to the thickness of the new Stud's jam nut plus the guide plate thickness. The Stud Boss Cutter from COMP Cams comes with a universal arbor that also...

COMP Cams Valve Guide Cutter For .425 O - 4703

Valve guide cutters available to cut guide to .425" - .446" - .494" - .500" - .530" - .625". Requires the use of an arbor/pilot, which are available for 5/16", 11/32" and 3/8" valve stem sizes.

Clevite Plastigage Yellow Plastigage - 12 Pack - MPY1

Clevite Plastigage is designed as a final check of total vertical oil clearance during reassembly. This does not replace properly measuring crankshaft journals, housing bores, or bearing dimensions before engine reassembly with accurate micrometers and...

Clevite Plastigage Red Plastigage - 12 Pack - MPR1

Clevite Plastigage is designed as a final check of total vertical oil clearance during reassembly. This does not replace properly measuring crankshaft journals, housing bores, or bearing dimensions before engine reassembly with accurate micrometers and...

Clevite Plastigage Green Plastigage - 12 Pack - MPG1

Clevite Plastigage is designed as a final check of total vertical oil clearance during reassembly. This does not replace properly measuring crankshaft journals, housing bores, or bearing dimensions before engine reassembly with accurate micrometers and...

Clevite Plastigage Blue Plastigage - 12 Pack - MPB1

Clevite Plastigage is designed as a final check of total vertical oil clearance during reassembly. This does not replace properly measuring crankshaft journals, housing bores, or bearing dimensions before engine reassembly with accurate micrometers and...

Chemical Guys TORQX Random Orbital Polisher - TORQX

Chemical Guys TORQX Random Orbital Polisher

Chemical Guys TORQ10FX Random Orbital Polisher - 120V/60Hz - TORQ10FX

Chemical Guys TORQ10FX Random Orbital Polisher - 120V/60Hz

Chemical Guys TORQ R5 Rotary Red Backing Plate w/Hyper Flex Technology - 6in - BUFLC_302

Chemical Guys TORQ R5 Rotary Red Backing Plate w/Hyper Flex Technology - 6in

Chemical Guys TORQ R5 Rotary Red Backing Plate w/Hyper Flex Technology - 3in - BUFLC_300

Chemical Guys TORQ R5 Rotary Red Backing Plate w/Hyper Flex Technology - 3in