COMP Cams Beehive Spring Micrometer 1.6 - 4930

Smaller diameter tool for beehive springs, measures 1.600"-2.200" installed height; Quickest, easiest, most accurate way to measure valve spring installed height; Install just like a spring, then is expanded until it fully seats valve, locks and retainer...

COMP Cams Spring Micrometer 1.600-2.200 - 4929

Measures 1.600"-2.200" installed height; Quickest, easiest, most accurate way to measure valve spring installed height; Install just like a spring, then is expanded until it fully seats valve, locks and retainer.; Simulated installation allows ultra...

COMP Cams Spring Micrometer 1.400-1.800 - 4928

Measures 1.400"-1.800" installed height; Quickest, easiest, most accurate way to measure valve spring installed height; Install just like a spring, then is expanded until it fully seats valve, locks and retainer.; Simulated installation allows ultra...

COMP Cams Cam Checking Tool For Chrysler - 4926

This innovative tool actually slides down into the lifter bore and rides on top of the camshaft in order to measure lobe lift and base circle runout. Each tool includes two followers: one for solid or Hydraulic cams and one for rollers. Two models are...

COMP Cams Cam Checking Tool - 4925

This innovative tool actually slides down into the lifter bore and rides on top of the camshaft in order to measure lobe lift and base circle runout. Each tool includes two followers: one for solid or Hydraulic cams and one for rollers. Two models are...

COMP Cams Tool Dampner Installation - 4920

Universal Kit fits all domestic and most foreign engine applications; Utilizes thrust bearing to gently ease the harmonic balancer onto the crank snout; Eight interchangeable adapters include: 7/16?, 1/2?, 9/16?, 5/8?, 3/4?, 12mm, 14mm, and 16mm

COMP Cams Fixture Crh Cam Degree - 4915

COMP Cams Cam Checking Fixture was designed to maintain proper geometry while holding a dial indicator with extension right over the lifters. The professional quality tool is much easier to use and more precise than using a magnetic indicator base when...

COMP Cams 6in Extension - 4911

This 6" tip extension for dial indicators allows you to use your dial indicator in tight spaces that require a longer reach.

COMP Cams 6in Dial Calipers - 4908

Handiest precision measuring tool available; Can measure inside dimensions, outside dimensions or depth to .001" accuracy over the entire 6" range; Rigid stainless steel body; 0-100 revolution dial; Includes fitted case

COMP Cams Cam Fixture Valve W/Metric A - 4902

This tool screws into any 1/4? -20 valve cover bolt hole and with the use of a dial indicator (not included), allows you to measure cam lift at the rocker arm, pushrod or lifter. This multi-functional tool can also be used to check rocker ratio,...

COMP Cams Crank Socket FS/FF/P - 4798

When slipped on the end of a crankshaft, these specially designed sockets let you use a 1/2" drive ratchet or breaker bar to rotate the engine assembly. Our sockets also have the unique feature of a provision to hold our degree wheels or any wheel with a...

COMP Cams 16in Degree Wheel - 4791-1

COMP Cams Professional Degree Wheel is machined from a 1/4" thick aluminum plate, red anodized and precision engraved. The open design allows degree bushing changes while the wheel is still on the engine. This extreme precision tool is a must for any...