SPC Performance 1.0 deg. Camber/Toe Shim - 71862

This easy to install full contact shim set is perfect for Nissan Versas and Renault Clios needing rear camber or toe adjustment. SPC's fixed change shims will provide +-0.5deg to +-1.0deg of toe...

SPC Performance 1.0 deg. Camber/Toe SHIM-Peugeot - 71856

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

SPC Performance 1.0 deg. Ford Camber Shim - 71764

This full contact rear shim adds positive 1.0deg camber to minimize camber related tire wear for 08-09 Ford Taurus and 05-07 Ford Freestyle FWD. Brake caliper shim included for correct hub to caliper...

SPC Performance 1.0in. FLARED HOLE DIE - 15840

Often called "dimple dies", flared hole dies are used in sheet-metal fabrications to provide rigidity and strength to flat, unsupported panels. Due to the resulting high strength -to-weight ratio...

SPC Performance 1.5in. FLARED HOLE DIE - 15850

Often called "dimple dies", flared hole dies are used in sheet-metal fabrications to provide rigidity and strength to flat, unsupported panels. Due to the resulting high strength -to-weight ratio...

SPC Performance 1.5in. JOUNCESHOCK - 25710

Double your suspension capacity: 6" long base unit is great for tight spaces with 1:1,2:1 or 3:1 motion ratios. California Residents WARNING

SPC Performance 1/16in. DUO FIT SHIM (25) - 37102

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

SPC Performance 1/16in. DUO FIT SHIM (25) - 37106

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

SPC Performance 1/16in. THICK TUBE-40910 - 4428

1/16" (1.5875mm) Thick Tube Press Adaptor to be used with SPC #40910 Upper Control Arm Bushing Service Set. This adaptor helps remove stubborn bushings from control arms.

SPC Performance 1/2 deg. 4X4 BUSHING - 23004

This sleeve will easily change Camber and/or Caster .50˚ for vehicles equipped with DANA 44 or GM 10 bolt axles. Installation requires removal of the upper ball joint stud nut. Break the taper free...

SPC Performance 1/2 deg. 4X4 Camber/Caster Sleeve - 23132

Change camber,caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve...

SPC Performance 1/2 deg. Camber/Caster Sleeve - 23182

These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring...