SPC Performance .75 deg. Ford Camber Shim - 71763

This full contact rear shim adds positive 0.75deg camber to minimize camber related tire wear for 08-09 Ford Taurus and 05-07 Ford Freestyle FWD. Brake Caliper shim included for correct hub to...

SPC Performance .75 deg. NYLON CAMBER SHIM - 71732

For camber and toe change, use our Mini-Van Shims that allow for quick and easy changes in increments of: toe .10 degrees and camber .25 degrees. CAUTION:check brake and rotor clearance for binding...

SPC Performance .75 FLARED HOLE DIE - 15835

Often called "dimple dies", flared hole dies are used in sheet-metal fabrications to provide rigidity and strength to flat, unsupported panels. Due to the resulting high strength -to-weight ratio...

SPC Performance .80 deg. NYLON TOE SHIM - 71725

For camber and toe change, use our Mini-Van Shims that allow for quick and easy changes in increments of: toe .10 degrees and camber .25 degrees. CAUTION:check brake and rotor clearance for binding...

SPC Performance 0 deg. 4X4 Camber/Caster Sleeve - 23139

Change camber,caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve...

SPC Performance 0 deg. Camber/Caster Sleeve - 23199

These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring...

SPC Performance 0 deg. FORD Camber/Caster Sleeve - 23109

This sleeve will easily change Camber and/or Caster 0.00° for vehicles equipped with twin traction beam DANA 44 axles. Simply remove the tire, cotter pin and upper ball joint stud nut and break the...

SPC Performance 0 deg. FORD SLEEVE - 23229

This sleeve will easily change Camber and/or Caster 0.00° on Ford Heavy Duty trucks. These sleeves are designed for Ford F250 and F350 Super Duty truck applications. Use the (23229) zero-degree...

SPC Performance 0 deg. FORD SLEEVE - 23239

This sleeve will easily change Camber and/or Caster 0.00° on Ford F450 and F550 Super Duty trucks with Dana Super 60 solid axles. Use the (23239) zero-degree sleeve to determine the amount of change...

SPC Performance 00-05 Saturn L Series Rear EZ Arm XR Adjustable Control Arm - 67270

Designed to adjust camber on the new Saturn "L" series cars, this arm is easy to install and provides rear camber adjustment for the life of the vehicle. With its 8 degree adjustment range this arm...

SPC Performance 00-05 Toyota Celica GT/GTS Rear Adjustable Camber Arm - 67440

These high strength forged rear arms are perfect for tuners or installers that need extended camber ranges on these popular platforms. Complete with O.E. stype bushings installed for a factory type...

SPC Performance 00-09 Honda S2000 Front/Rear Adjustable Ball Joint (1.5deg.) - 67220

Designed specifically for the S2000, this ball joint corrects camber on both the front and rear. An O.E. quality ball joint, this adjustable part corrects camber up to +/-1.5deg. NOTE: This ball...