SPC Performance ROUND BRG RECVR .8125 - 15065

Bearing Dia 0.8125",Bearing Race Width 0.4060", Receiver OD 1.063",Receiver Height 0.58" Bearing Offset 0.0170". California Residents WARNING

SPC Performance ROUND BRG RECVR 1.0in. - 15060

Bearing Dia 1.0000",Bearing Race Width 0.5050", Receiver OD 1.250",Receiver Height 0.71" Bearing Offset 0.0125". California Residents WARNING

SPC Performance ROUND BRG RECVR 1.1875in. - 15055

Bearing Dia 1.1875",Bearing Race Width 0.5670", Receiver OD 1.483",Receiver Height 0.84" Bearing Offset 0.0265". California Residents WARNING

SPC Performance RPLCMNT C FRAME-40910 - 4434

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

SPC Performance S-Cam Bushing Service Extractor Tool - 91860

Great tool for any Heavy Duty shop that works on low boys, refers, log trucks and more. Now you can remove and replace the S-Cam bushing on air brake equipped trailers without removing the wheel hub...

SPC Performance Santa Fe Adj. Rear Arm - 67495

Get +-3.5deg of camber and +-1.5deg of toe on the rear of the 2003 to 2006 Hyundai Santa Fe by replacing the rear upper control arm. Use the included extended range cam bolt on the lower link to...

SPC Performance Sante Fe Adj. Cams (Pr) - 67493

Double the change provided by the OE cams for camber and toe on the rear of the 2001 to 2006 Hyundai Santa Fe by using SPC's replacement cams. This kit contains two assemblies, enough to adjust toe...

SPC Performance Scion / Lexus Rear Adjustable Toe Arm - 67800

Extend total toe cahnge on many Scion, Lexus, and Toyota models with SPC's replacement rear toe adjustment arm. Many of these mondels come with factory adjustment but need more due to factory...

SPC Performance Scion/Lexus Fixed Length Rear Control Arm - 12030

Replace your worn or bent rear control arm (OE# 4877012010) on the Scion tC and iM, as well as the Lexus CT and HS vehicles. This arm features xAxis and rubber bushings to match OE design and...

SPC Performance SET (9) 4X4 SLEEVES - 23130

Change camber,caster or both at the same time with these sleeves. Simply remove the tire, cotter pin and upper ball joint stud nut and break the taper free between the stud and sleeve. Using a sleeve...

SPC Performance SET (9) Camber/Caster Sleeve - 23180

These popular sleeves are widely used to adjust caster and/ or camber on many Ford and Mazda RWD & 4WD trucks. To install, simply loosen and remove upper ball joint pinch bolt. Remove top snap ring...

SPC Performance SHOCK REBUID KIT(1 SHOCK) - 25712

The seals, O-rings,wear bands,and valve pieces you will need to rebuild one (1) JounceShock,Kit includes Shock Valve Extension (#25515) for charging your JounceShock. California Residents WARNING