COMP Cams Magnetic Base Setup - 4907

COMP Cams Magnetic Base for Dial Indicator is the most compact base on the market but still provides 45 lbs. of pull. This tool is often used for end play adjustment but is also helpful when degreeing camshafts. This tool makes checking deck clearances...

COMP Cams Bracket For Spring Checker - 4903

COMP Cams Bracket For Spring Checker

COMP Cams Cam Fixture Block - 4901

COMP Cams Cam Checking Fixture was designed to maintain proper geometry while holding a dial indicator with extension right over the lifters. The professional quality tool is much easier to use and more precise than using a magnetic indicator base when...

COMP Cams Magnetic Deck Checker - 4900

To calculate true compression ratio it's necessary to measure the distance between the deck surface of the block and the piston deck. Our machine aluminum deck checker incorporates magnets to hold itself firmly to the block for simple and accurate...

COMP Cams Socket Chrysler Crank - 4799

When slipped on the end of a crankshaft, these specially designed sockets let you use a 1/2" drive ratchet or breaker bar to rotate the engine assembly. Our sockets also have the unique feature of a provision to hold our degree wheels or any wheel with a...

COMP Cams Socket For CB Crank - 4797

When slipped on the end of a crankshaft, these specially designed sockets let you use a 1/2" drive ratchet or breaker bar to rotate the engine assembly. Our sockets also have the unique feature of a provision to hold our degree wheels or any wheel with a...

COMP Cams Pointer Degree Wheel - 4794

This pointer is designed for use with a camshaft degree wheel. As the degree wheel turns, this pointer stays in place and indicates the position of the engine cycle.

COMP Cams Socket For CS Crank - 4793

When slipped on the end of a crankshaft, these specially designed sockets let you use a 1/2" drive ratchet or breaker bar to rotate the engine assembly. Our sockets also have the unique feature of a provision to hold our degree wheels or any wheel with a...

COMP Cams Degree Wheel - 4790

Multiple sized degree wheels provide precision and accuracy; Size allows for use on engine stand or with the engine still in vehicle; Can be bolted on most harmonic balancers or used with a COMP crankshaft socket; Easy-to-read and clean;

COMP Cams Degree Wheel Comp 7.5in - 4787

Multiple sized degree wheels provide precision and accuracy; Size allows for use on engine stand or with the engine still in vehicle; Can be bolted on most harmonic balancers or used with a COMP crankshaft socket; Easy-to-read and clean;

COMP Cams ID Sprng Seat 1.50 X 585 X 69 - 4770-1

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4770 features a 1.500" OD and a .585" ID that works well with our 985, 978, 924 and 939 dual valve springs.

COMP Cams Checking Springs - 4758-2

Checking springs are essential for any engine project. Whether you're checking piston to valve clearance, rocker ratio, valve lift, degreeing a cam or measuring for pushrod length, checking springs are a necessity.