COMP Cams Checking Spring - 4758-1

Checking springs are essential for any engine project. Whether you're checking piston to valve clearance, rocker ratio, valve lift, degreeing a cam or measuring for pushrod length, checking springs are a necessity.

COMP Cams 3/8 Arbor (For Cutters) - 4734

This 3/8" Arbor/Pilot from COMP Cams is required for use with Spring Seat Cutters and Guide Cutters. Arbor/Pilots from COMP Cams will also work with the valve guide cutters used for shortening the guide for a high lift cam or installing a COMP Cams...

COMP Cams 5/16 Arbor (For Cutters) - 4730

This 5/16" Arbor/Pilot from COMP Cams is required for use with Spring Seat Cutters and Guide Cutters. Arbor/Pilots from COMP Cams will also work with the valve guide cutters used for shortening the guide for a high lift cam or installing a COMP Cams...

COMP Cams Cup Adjuster Screw Ultra Golds - 4660-16

Replacing the set screws that come with our Ultra-Gold ARC rockers, these set screws allow you to lock down the adjuster nuts on our Ultra-Gold ARC rocker arms.

COMP Cams Cup Adjuster Screw Ultra Golds - 4660-1

Replacing the set screw that comes with our Ultra-Gold ARC rockers, this set screw allows you to lock down the adjuster nut on our Ultra-Gold ARC rocker arms.

COMP Cams Set ScrewsLS1 3/8-24 X .250 - 4654SS-16

These set screws replace the set screws that come with our adjustable Ultra Pro Magnum rocker arms for GM LS1/LS2/LS6 and LS3.

COMP Cams Cam Lock Plate Chevy - 4605

COMP Cams Chevrolet V8 Cam Lock Plate helps prevent cam bolts from backing out. It is effective at any rpm level or load. It has bendable locking tabs and comes with special high-strength bolts. COMP Cams Chevrolet V8 Cam Lock Plate works in Chevrolet...

COMP Cams CS Hi-Tech Gear Dr.W/Factory H - 4136

COMP Cams Late Model Small Block Chevy Gear Drive System has precision machined, heat-treated billet steel gears for timing accuracy and durability. Its unique design eliminates timing movement throughout the rpm range. It is ideal for street...

COMP Cams Rev Kit CS6 - 4006

In some endurance and oval track applications, it is necessary to use a rev kit to precisely follow the profile of the cam. This safety measure ensures that in the event of pushrod breakage or rocker arm failure, the lifter will not come out of the bore...

COMP Cams Stud Girlde Bar For CS (1) - 4004B-1

4004B-1 - Stud Girdle Bar, for CS (1)

COMP Cams Plate For CS Rev Kit - 4000-P

Engine Valve Lifter Locking Bar

COMP Cams Cam Bearing CB 2.125in Composi - 3521

COMP Cams Composite Coated Cam Bearings for 2.124" journals retain engine oil on surface even under extreme heat and pressure. Their fluoropolymer coating is a lubricant itself, which is great for protection in the event of momentary oil starvation.