Edelbrock 1 1/4 PCV Grommets 1Pr - 8094

Designed to plug the oil fill hole on any of Edelbrocks Signature Series valve covers or any 1-1/4in. diameter fill hole on similar designs.

Edelbrock 1 Bar Delco Manifold Absolute Pressure (Map) Sensor - 36019

Edelbrock Pro-Flo 4 EFI System for Chevrolet LS GEN III/IV engines. The EFI system comes with a traditional 4150-Style satin finish Victor Jr. cathedral port intake & 35 Lb/Hr injectors capable of...

Edelbrock 1 Exhaust Valve 1 60 60779 60179 Head - 9367

Edelbrock part #17303 fuel pump is a gravity fed type pump with a simple 2 wire design. It requires approximately one amp average draw at maximum delivery and works on 12 Volt negative ground systems...

Edelbrock 1 Exhaust Valve 1 68 Olds 60519 Head - 9317

Edelbrock part #1723 Performer RPM Series fuel pump is for Big-Block Chrysler designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications.

Edelbrock 1 Exhaust Valve 1 90 BBC Victor Head - 9362

Edelbrock #9362 Exhaust Valve is a 1.90" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits #61409 & 77409 Cylinder Heads

Edelbrock 1 Exhaust Valve for 6067/6069 - 93772

1-piece, swirl-polished, hardened tip stainless steel exhaust valves with undercut stems for increased flow. Hard-chromed valve stems are 11/32in. except where noted

Edelbrock 1 Exhaust Valves 1 60 77169 77179 77189 77199 Head - 9372

Edelbrock #9372 Exhaust Valve is a 1.60" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits #77169, 77179, 77189, 77199, 77359 Cylinder Heads

Edelbrock 1 Intake Valve 2 02 60779 60179 Head - 9365

Edelbrock Performer RPM II Dual-Stage Nitrous System #70083 is designed for those who want to add power in stages to soften the "hit" of the nitrous system. This system is for use with 4500 Series...

Edelbrock 1 Intake Valve 2 072 Olds 60519 Head - 9375

1-piece, swirl-polished, hardened tip stainless steel exhaust valves with undercut stems for increased flow. Hard-chromed valve stems are 11/32in. except where noted

Edelbrock 1 Intake Valve 2 30 BBC Victor Head - 9360

Edelbrock Performer RPM Fuel Solenoid #72051 is made from stainless steel for corrosion for resistance and has a low amp draw. Supports up 400 horsepower and has 1/4" NPT inlet with a 1/8" NPT outlet.

Edelbrock 1 Intake Valve for 6041/6040 - 97040

The Edelbrock #97040 Intake Valves is a 2.25" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut 11/32" stem. Fits Edelbrock #61459, #61559 & #61555 Cylinder Heads.

Edelbrock 1 Intake Valve for 6067/6069 - 93770

1-piece, swirl-polished, hardened tip stainless steel exhaust valves with undercut stems for increased flow. Hard-chromed valve stems are 11/32in. except where noted