Edelbrock 076 Main Jet - 1976

Q-Jet Primary Metering Jets for Edelbrock and GM Rochester Q-Jet carbs. Not for computer-controlled carbs. Note: Calibration changes may affect emissions-legal status of number 1901, number 1902,...

Edelbrock 077 Main Jet - 1977

Q-Jet Primary Metering Jets for Edelbrock and GM Rochester Q-Jet carbs. Not for computer-controlled carbs. Note: Calibration changes may affect emissions-legal status of number 1901, number 1902,...

Edelbrock 08-18 Ford V8 4.6L-5.4L/V10 6.8L Ignition Coil - Set of 8 - 22791

Edelbrock Coil Pack #22791 is a set of eight coil-on-plug coils designed as direct performance replacements for the OEM coils on 2008-18 Ford 4.6L-5.4L V8 engines. This coil pack can also be used to...

Edelbrock 08-18 Ford V8 4.6L-5.4L/V10 6.8L Ignition Coil - Single - 22790

Edelbrock Coil #22790 is a single coil-on-plug coil designed as a direct performance replacement for the OEM coil on 2008-18 Ford 4.6L-5.4L V8 engines and the 6.8L Triton V10 engine. Each #22790 coil...

Edelbrock 1 1/4 PCV Grommets 1Pr - 8094

Designed to plug the oil fill hole on any of Edelbrocks Signature Series valve covers or any 1-1/4in. diameter fill hole on similar designs.

Edelbrock 1 Bar Delco Manifold Absolute Pressure (Map) Sensor - 36019

Edelbrock Pro-Flo 4 EFI System for Chevrolet LS GEN III/IV engines. The EFI system comes with a traditional 4150-Style satin finish Victor Jr. cathedral port intake & 35 Lb/Hr injectors capable of...

Edelbrock 1 Exhaust Valve 1 60 60779 60179 Head - 9367

Edelbrock part #17303 fuel pump is a gravity fed type pump with a simple 2 wire design. It requires approximately one amp average draw at maximum delivery and works on 12 Volt negative ground systems...

Edelbrock 1 Exhaust Valve 1 68 Olds 60519 Head - 9317

Edelbrock part #1723 Performer RPM Series fuel pump is for Big-Block Chrysler designed for use with all Edelbrock carburetors used in Performer or Performer RPM applications.

Edelbrock 1 Exhaust Valve 1 90 BBC Victor Head - 9362

Edelbrock #9362 Exhaust Valve is a 1.90" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits #61409 & 77409 Cylinder Heads

Edelbrock 1 Exhaust Valve for 6067/6069 - 93772

1-piece, swirl-polished, hardened tip stainless steel exhaust valves with undercut stems for increased flow. Hard-chromed valve stems are 11/32in. except where noted

Edelbrock 1 Exhaust Valves 1 60 77169 77179 77189 77199 Head - 9372

Edelbrock #9372 Exhaust Valve is a 1.60" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits #77169, 77179, 77189, 77199, 77359 Cylinder Heads

Edelbrock 1 Intake Valve 2 02 60779 60179 Head - 9365

Edelbrock Performer RPM II Dual-Stage Nitrous System #70083 is designed for those who want to add power in stages to soften the "hit" of the nitrous system. This system is for use with 4500 Series...