COMP Cams Super Valve Locks 11/32-.050 - 630-12

Set of 12 - 10 Degree 11/32 Single Groove Locks w/ Lash Cap Recess -.050" Height

COMP Cams Super Valve Lock Eb11/32-.050 - Set of 100 - 630-100

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case. The cross-section of material in the tang is...

COMP Cams Super Valve Lock 11/32in-.050in - 630-1

lock angle and .11/32" valve stem size. It is recommended for all Race Applications because Super Locks have a wider angle 10°

COMP Cams Valve Locks 7 Deg W/5.5MM Ste - Set of 32 - 629-32

Machined Steel Set of 32 - 7 Degree, 5mm, Single Groove Race Locks

COMP Cams Valve Locks 7 Deg W/5.5MM Ste - 629-16

lock angle and 5.5mm valve stem size are perfect locks for Honda B and D engine Applications.

COMP Cams Valve Locks 7 Deg W/5.5MM Ste - Set of 100 - 629-100

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case. The cross-section of material in the tang is...

COMP Cams Valve Lock 7Deg W/5.5MM Stem - 629-1

Machined Steel 7 Degree, 5mm, Single Groove Race Lock

COMP Cams Valve Locks 5/16in 7Deg - 628-16

lock angle and 5/16" valve stem size are perfect locks for many Applications.

COMP Cams Valve Locks Eb 5/16in 7Deg - Set of 100 - 628-100

Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running, but this isn't the case. The cross-section of material in the tang is...

COMP Cams Valve Lock 5/16in 7Deg - 628-1

lock angle and 5/16" valve stem size are perfect locks for many Applications.

COMP Cams Super Locks Chrysler 2&4 Groov - Set of 16 - 627-16

locks (see drawing), reducing the chance of "pull-through" failure. Precision machined rather than stamped for the ultimate in accuracy. Super-tough, fatigue resistant alloy material. Inside tang to...

COMP Cams Super Locks Chrysler 4 Groove - Set of 16 - 626-16

lock angle and 3/8" valve stem size. They are recommended for all Race Applications because Super Locks have a wider angle 10°