COMP Cams ID Spring Seat 1.350 X 515 X - 4868-1

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4868 features a 1.350" OD and a .515" ID.

COMP Cams ID Spring Seats 1.300 X 570 X - 4863-16

Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4863 features a 1.300" OD and a .570" ID.

COMP Cams ID Spring Seat 1.300 X 570 X - 4863-1

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4863 features a 1.300" OD and a .570" ID.

COMP Cams ID Spring Seats Gm LS7 1.270in - 4862-16

Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4862 features a 1.270" OD and a .520" ID.

COMP Cams ID Spring Seats Eb Gm LS7 1.2 - 4862-100

The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today. COMP Cams offers a simple but effective solution to this problem - a thin, hardened steel alloy seat which will not...

COMP Cams ID Spring Seat Gm LS71.270in X - 4862-1

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4862 features a 1.270" OD and a .520" ID.

COMP Cams Spring Seats LS1 Beehive - 4861-16

Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4861 features a 1.300" OD and a .510" ID.

COMP Cams Spring Seats Eb LS1 Beehive - 4861-100

The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today. COMP Cams offers a simple but effective solution to this problem - a thin, hardened steel alloy seat which will not...

COMP Cams Spring Seat LS1 Beehive W/ .5 - 4861-1

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4861 features a 1.300" OD and a .510" ID.

COMP Cams ID Spring Seats 1.655 X 570 X - 4860-16

Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4860 features a 1.655" OD and a .570" ID.

COMP Cams ID Spring Seats Eb 1.655 X 57 - 4860-100

The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today. COMP Cams offers a simple but effective solution to this problem - a thin, hardened steel alloy seat which will not...

COMP Cams ID Spring Seat 1.655 X 570 X - 4860-1

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4860 features a 1.655" OD and a .570" ID.