COMP Cams ID Spring Seats 1.625 X 630 X - 4775-16

Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4775 features a 1.540" OD and a .640" ID that works well with our 996, 998, 26099 and 991 dual valve springs.

COMP Cams ID Spring Seats Eb 1.625 X 63 - 4775-100

The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today. COMP Cams offers a simple but effective solution to this problem - a thin, hardened steel alloy seat which will not...

COMP Cams ID Spring Seat 1.625 X 630 X - 4775-1

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4775 features a 1.540" OD and a .640" ID that works well with our 996, 998, 26099 and 991 dual valve springs.

COMP Cams ID Spring Seats 1.625 X 570 - 4774-16

Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4774 features a 1.625" OD and a .570" ID that works well with our 996, 998, 26099 and 991 dual valve springs.

COMP Cams ID Spring Seats Eb 1.625 X 57 - 4774-100

The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today. COMP Cams offers a simple but effective solution to this problem - a thin, hardened steel alloy seat which will not...

COMP Cams ID Spring Seat 1.625 X 570 X - 4774-1

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4774 features a 1.625" OD and a .570" ID that works well with our 996, 998, 26099 and 991 dual valve springs.

COMP Cams ID Spring Seats 1.5 X 630 X - 4773-16

Made from hardened steel, these locators use an inboard locating shoulder to center the seat and hold the spring in place. The 4773 features a 1.540" OD and a .640" ID that works well with our 932, 935 and 26094 dual valve springs.

COMP Cams ID Spring Seats Eb 1.5 X 630 - 4773-100

The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today. COMP Cams offers a simple but effective solution to this problem - a thin, hardened steel alloy seat which will not...

COMP Cams ID Spring Seat 1.5 X 630 X 75 - 4773-1

Made from hardened steel, this locator uses an inboard locating shoulder to center the seat and hold the spring in place. The 4773 features a 1.540" OD and a .640" ID that works well with our 932, 935 and 26094 dual valve springs.

COMP Cams ID Spring Seats 1.5 X 570 X 7 - 4772-4

ID Spring Locator Set of 4 - 1.550" OD, .570" ID, .060" Thick

COMP Cams ID Spring Seats 1.5 X 570 X - 4772-16

The old standard shims will not hold up to the extreme spring pressures and high RPM in today's race engines. COMP Cams offers a simple but effective solution to this problem. These Valve Spring Locators provide a thin, hardened steel alloy seat that...

COMP Cams ID Spring Seats Eb 1.5 X 570 - 4772-100

The older style standard shims will not hold up to the extreme spring pressures and high RPM found in racing engines being built today. COMP Cams offers a simple but effective solution to this problem - a thin, hardened steel alloy seat which will not...