SPC Performance CUTTING/TAPPING FLUID - 85774

This fluid lubricates the 85125 rotary file set, and the 68670 Rotor-Bor to reduce stress on the cutting teeth. This product is highly recommended to prolong the life of all cutting bits used on...

SPC Performance CV JOINT TOOL - 38620

When used with #499, this tool will pull most CV joints that use a hidden snap ring to hold them in the transaxle. Made to remove the transaxle assembly without damaging the transmission case or...

SPC Performance DANA 60 ADJ 1 deg. - 88940

These exclusive kits provide a camber & caster change for DANA 60 axles. Replace the O.E. bushing with the correct eccentric bushing, rotate to adjust caster/camber and lock in place. These kits...

SPC Performance DATSUN CAMBER KIT - 83115

To correct camber remove the O.E. lower control arm attaching bolt and move arm away from the bracket. Using 73010 Punch, enlarge the hole in the bracket and re-attach the lower control arm using the...

SPC Performance DEBURR KNIFE - 33172

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

SPC Performance DODGE 1500 ADJ BALLJOINT - 23940

Lifted or lowered, factory cams don't give enough adjustment range on the Dodge Ram 1500 series of trucks. Gain 2.25deg of camber or caster with these offset ball joints. Simply replace the ball...

SPC Performance Dodge 1500 CAM BOLT KIT(2) - 82420

Replace coroded or damaged factory front camber and caster bolts on the Dodge Ram 1500 with these hex chromate free 700 salt spray tested cam bolts from SPC. This kit is sold per wheel and gives you...

SPC Performance DODGE CAS/CAM ADJ (PR) - 23755

These heavy duty bolts and brackets replace the upper control arm mounting bolts giving you both camber and caster adjustment. Kit includes 2 cam and bolt sets to cover one side of the vehicle...

SPC Performance DODGE CAS/CAM ADJ (PR) - 23765

These heavy duty bolts and brackets replace the upper control arm mounting bolts giving you both camber and caster adjustment. Kit includes 2 cam and bolt sets to cover one side of the vehicle...

SPC Performance Dodge Caster/Pinion Cams - 82395

Replace non-adjustable or corroded OE bolts on Dodge 3/4 and 1-ton trucks to achieve ± 1.50 ° degrees of caster adjustment as well as front pinion angle change. Whether the truck is lifted or stock...

SPC Performance DODGE PIN JOINT 0 deg. - 23850

These HD 'King Pin' style joints replace the original sliding-ball design upper joints on late-model 4500 and 5500 Dodge trucks and rebadged Sterling Bullets. They provide independent adjustment up...

SPC Performance DODGE PIN JOINT 1 deg. - 23852

These HD 'King Pin' style joints replace the original sliding-ball design upper joints on late-model 4500 and 5500 Dodge trucks and rebadged Sterling Bullets. They provide independent adjustment up...