SPC Performance DUAL ANGLE SHIM BRD SET - 88700

Full coverage of an assortment of shims, plus the tools needed to complete the installation. Hanging board allows for better inventory control. California Residents WARNING

SPC Performance Early GM Metric B/Joint - 94001

Use this stock height replacement ball joint in SPC's adjustable upper control arms, p/n's 94305 and 94320. This GM metric midsized balljoint will also fit SPC's bolt in plates, p/n's 92006, 92008,...

SPC Performance END MOUNT & ADAPTOR ASSY - 25501

The 15deg Flex Mount assembly can be welded to your mounting point,giving you 7.5deg of articulation in any direction during compression and centering the JounceShock during rebound.The 15deg Flex...

SPC Performance END MOUNT & ADAPTOR ASSY - 25505

The Fixed Mount assembly can be welded to your mounting point.It provides a simple attachment point for your JounceShock.The Fixed Mount will most often be used with the Domed Foot on the shaft end...

SPC Performance END MOUNT & ADAPTOR ASSY - 25508

The Coil Carrier / Bolt Up Mount can be sandwiched in your spring seat or bolted to the bottom of a frame.Plate can be trimmed to square as a bolt up or welded frame mount. California Residents...

SPC Performance END MOUNT & ADAPTOR ASSY - 25530

This universal mount provides a versatile weld or bolt on option to mount your JounceShock in a fixed position (trim to fit) California Residents WARNING

SPC Performance END MOUNT & ADAPTOR ASSY - 25601

The threaded Cupped Foot with the Domed Target,which can be bolted or welded to your JounceShock for up to 30deg of motion as your suspension travels. California Residents WARNING

SPC Performance END MOUNT & ADAPTOR ASSY - 25602

The Domed foot screws directly into the shaft of the JounceShock.This is the most traditional of bump shock ends and is most often used in an application with some scrub on a Target Plate.It can also...

SPC Performance END MOUNT & ADAPTOR ASSY - 25604

The Domed foot screws directly onto the shaft of the JounceShock.This is the most traditional of bumpshock ends and is most often used in an application with some scrub on a Target Plate. It can also...

SPC Performance Euro Spec 07-08 Honda Civic Type R Rear Camber Shims 0.50 Degree (Single) - 71651

This easy to install full contact shim is specifically designed for the Internationl models of the Honda Civic Type R. The specific regions include the following years: European (2007-2008) and Asian...

SPC Performance Euro Spec 07-08 Honda Civic Type R Rear Camber Shims 1.00 Degree (Single) - 71652

This easy to install full contact shim is specifically designed for the Internationl models of the Honda Civic Type R. The specific regions include the following years: European (2007-2008) and Asian...

SPC Performance European Alignment Cam Tool - 87575

Make your alignments easier on many Audi, Volkswagen, BMW and Porsche vehicles with this alignment cam tool. Featuring 21mm and 24mm socket sizes, this extra long tool features a thin profile and...